Automatic nipple drinker with 360 Degree Nipples
The nipple type water dispenser consists of a valve core and a contact rod, which are directly connected to the water pipe,
To achieve the best breeding effect, under the condition of appropriate bedding humidity, the water line pressure can be increased to increase the water consumption of poultry.
filter must be installed at the front end of the waterline, and the filtration accuracy of the filter element should not be less than 120 mesh;
The height before and after the waterline must be consistent (based on the ground height);
For situations where the height difference between the ground before and after the poultry house is more than 10cm, ensure that the front end of the water line is installed on the higher side, allowing the water flow to flow towards the lower side of the poultry house. The maximum height difference between the front and rear of the poultry house should not exceed 15cm.
The flushing method and steps are as follows:
Open the drain valve at the end of the water line (if equipped with an automatic backwash system, this drain valve can be set to normally open);
Adjust the regulator valve to the recoil position (rotate 180 °) (this step is not required for the automatic recoil system).
After the recoil is completed, rotate the valve to the normal water supply position;
Audited Supplier 
){kind=link}